Description Truly endless high performance power transmission belts with thermo set resin body and steel traction cord. The high Modulus cords used in the belt production allow greater length stability but lower bearing load.Have a very chemical resistance to oils, greases and petroleum products. Application temperature between -30 to 100 degree celsius. Low pre- tension needed. can reach liner speeds upto 90m/sec. -PITCHES AVAILABLE are XL, L, H, T2.5, T5, T10, T20, AT5, AT10, AT20 -ENDLESS LENGTHS available in multiples of pitch value. -Cut in widths as per requirement (2mm to 20mm width) -Double Side Toothed Belts available in the above pitches. -Timing belts available in OPEN LENGTH(Not Endless- Flex belts).

NyloGrip Conveyor belts cover a wide spectrum of types and applications. Our special bonding techniques ensure very high adhesion levels between cover to ply and ply to ply, achieving superior belt consolidation and higher peel resistance. Better transverse flexibility of our belts allow deeper toughing, improving volumetric transfer capacity of the conveyors and at the same time higher longitudinal flexibility allows use of smaller pulleys and reduced flex fatigue. COVER GRADES: - GENERAL PURPOSE(M24) a)Grade M24 : Used in heavy duty applications for highly abrasive materials like metallic ores, coke, stone, rocks etc. TEMPERATURE – MAXIMUM 60 degree C. b)Grade N 17 : Recommended to carry moderately abrasive materials as coal, fine ores, cement sand etc. TEMPERATURE – MAXIMUM 60 degree C. -HEAT RESISTANCE (HR) a) Grade HR (T1) : For carrying hot coarse materials upto 125degC and hot fine materials upto 100degC. b) Grade SHR (T2) : For carrying hot coarse materials upto 150 degC and hot fine materials upto 100degC. c) Grade SHR 180 : Excellent heat resistance and moderate abrasion resistance characteristics and is recommended upto 180C for coarse and 150C for fine material. -CHEMICAL RESISTANCE(CR) : Resistant to chemically activated materials in fertilizer and chemical industries (Ammonium sulphate(granular) Acid Phosphates, Common Salt, Powdered Urea Etc). TEMPERATURE – MAXIMUM 70 degree C. -OIL RESISTANCE(OR) : Suitable for carrying materials which leave residues of fat and oil. TEMPERATURE – MAXIMUM 70 degree C.

PVC BARE BOTTOM BELTS: For General duty conveying applications. 2 layers of PVC cover with single/two/three or more plies of Polyester fabric. The bottom cover is of low noise impregnated Polyester Fabric Bare. Food Grade Belts (Fillers confirming to FDA) available in this range. PVC BOTTOM GRIP BELTS: For General and heavy duty conveying applications. 2 layers of PVC cover with single/two/three or more plies of Polyester fabric. The bottom cover is of Polyester Fabric- PVC Grip Pattern. The belt is used when there are multiple rollers in the conveyor. Food Grade Belts (Fillers confirming to FDA) available in this range. PVC DIAMOND TOP BELTS: For General duty conveying applications. 2 layers of PVC cover with single or two plies of Polyester fabric. The Top Cover will be checkered pattern to give friction to the products conveyed. The belt is used in Bag Checking Conveyor, Treadmills etc. PVC ROUGH TOP BELTS: For General duty conveying applications. 2 layers of PVC cover with two or three plies of Polyester fabric. The Top Cover will be of super grip PVC as in the image to give friction to the products conveyed. The belt is used when there is elevation in conveyor from ground level. - We give site belt mounting and site joining services. Joining can be finger-spliced or using fasteners .