Products

Eagles Unique HOT (Helical Offset Tooth) Design provides a continuous rolling tooth engagement to create a lighter, quieter, reduced vibration, flangeless drive to maximize both the performance and efficiency of your drove system. BELT NOMENCLATURE: - Eagle PD Yellow (8mm- 16 mm width) - Y-640, Y-720, Y-800 - Eagle PD White (8mm- 32 mm width) - W-720, W-800, W-1000, W-1120 - Eagle PD Purple (8mm- 16 mm width) - P-720, P-800, P-1000, P-1120

The toughest belt on the market, polychain GT belts performs flawlessly under the hardest operating conditions. It has armide fiberglass tensile and fabric covering the teeth is highly resistant to Oils, Chemicals Corrosion and Abrasion. It is made of light weight polyurethane compound. The belt teeth and body are made of a light weight polyurethane compound specially blended for adhesion to the cords and fabric. This uniquely formulated polyurethane make the belt tough and virtually immune to abrasion and chemicals the armide tensile provide extraordinary power carrying capacity. -Pitches available are 8M, 14M -GIGA TORQUE BELTS (GT BELTS) available in MITSUBOSHI. -GATES POLY CHAIN GT BELTS -CONTITECH SYNCHROCHAIN brand available. -Cut in widths as per requirement (2mm to 20mm width) -Double Side Toothed Belts available in the above pitches.

Special curvilinear tooth design substantially improves stree distribution and allows higher overall loading, precisely formed and accurately spaced polychloroprene teeth ensure smooth engagement with pulley grooves. Fibreglass tensile strength provide necessary strength. These belts are maintenance free and provide high running precision and greater stability. They require little pretensioning and are suitable for back-tension rollers. These range are also available with Double Side Belts. -PITCHES AVAILABLE are 2M , 3M, 5M, 8M,14M, S2M, S3M, S4.5M, S5M , S8M, S14M -Super Torque, HTD, MegaTorque belts are available in MITSUBOSHI. -ENDLESS LENGTHS available in multiples of pitch value. -Cut in widths as per requirement (2mm to 20mm width) -Double Side Toothed Belts available in the above pitches. -Timing belts available in OPEN LENGTH(Not Endless- Flex belts).

Truly endless high performance power transmission belts with thermo set resin body and steel traction cord. The high Modulus cords used in the belt production allow greater length stability but lower bearing load.Have a very chemical resistance to oils, greases and petroleum products. Application temperature between -30 to 100 degree celsius. Low pre- tension needed. can reach liner speeds upto 90m/sec. -PITCHES AVAILABLE are XL, L, H, T2.5, T5, T10, T20, AT5, AT10, AT20 -ENDLESS LENGTHS available in multiples of pitch value. -Cut in widths as per requirement (2mm to 20mm width) -Double Side Toothed Belts available in the above pitches. -Timing belts available in OPEN LENGTH(Not Endless- Flex belts).

High Power transmission capacity with higher transmission efficiency . These belts are maintenance free , and can deal with high dynamic stress. -PITCHES AVAILABLE are MXL, XL, L, H , XH, XXH -ENDLESS LENGTHS available in multiples of pitch value. -Available in RUBBER and POLYURETHANE material -Cut in widths as per requirement (2mm to 20mm width) -Double Side Toothed Belts available in the above pitches. -Timing belts available in OPEN LENGTH(Truly Endless- Flex belts). -Available in jointed type also.

Since their introduction more than 30years ago, the popularity of plastic modular belts has grown steadily. Constructed of injection-molded modules and hinge rods, plastic modular belts are positively driven and tracked by plastic sprockets. This positive drive and tracking system eliminates slippage, preventing damage to the belt’s edge and the potential for product contamination or premature belt failure. Plastic modular conveyor belts are assembled in a bricklayer pattern for strength and can be custom-made in virtually any width or length required. Various pitch sizes are also available to support specific conveyor designs; ½"pitch belts are used for tight transfers while larger pitch products such as 2"are used to convey heavier loads. - Applications:- Used in Automotive Food Industrial ,Logistics and Material Handling, Packaging and Tyre and Rubber Industries. - Pitches Available: From 12mm pitch to 50mm pitch Series. - Surface Types: FlatTop, Flush Grid, Raised Rib, Perforated. - Accessories Available: Sprockets, Flights, SideGaurds, Wear Strips and Retaining Ring.